Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlamp Bulb on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Headlight bulb

This brief tutorial shows you all the steps required to change the headlamp bulb on a third-generation Jeep Wrangler, produced from 2007 to 2018. Start by removing the six screws on the top of the front grille, then pull the grille to detach it from the metal clips located at the bottom and remove it. Next, remove the four Torx screws along the headlamp frame to extract it from its housing. Finally, disconnect the connector of the burnt bulb from behind the headlamp and fit a new one.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to Replace the Front Headlamp Bulb of a Jeep Wrangler
How to Replace the Front Headlamp Bulb of a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb of a Jeep Wrangler, first open the bonnet to access the bolts at the top of the front grille. Once released, you c…
How to replace the rear light bulb on a Jeep Wrangler?
How to replace the rear light bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the rear light bulb on a Jeep Wrangler, unscrew the four screws that secure the light, allowing it to be removed from its housing. Once re…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos