Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
Video tutorial

To remove the rear light of the Jeep Wrangler, open the tailgate to access the side of the boot corresponding to the light to be removed. Here, you will find a small square cover that must be removed to access the screw underneath.

This screw, which is 10 mm, must be loosened and completely removed to free the light unit from its housing. Once the light is freed, disconnect the connector and attach the new replacement part.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Removing the Third Brake Light on a Jeep Wrangler
Removing the Third Brake Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Let's see how to remove the third brake light on a Jeep Wrangler. The light is located behind the spare wheel. Unscrew the screws located at the back…
Removing the Centre Brake Light on Jeep Wrangler
Removing the Centre Brake Light on Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) How to remove the third brake light on a Jeep Wrangler? The light is located above the spare wheel of the vehicle. Remove the spare wheel, then unscr…
How to Replace the Front Headlight on a Jeep Wrangler?
How to Replace the Front Headlight on a Jeep Wrangler?
Jeep Wrangler (1987-1996 / YJ, MK 1) To replace the front headlight on a Jeep Wrangler, first open the bonnet to disconnect the connector at the back of the headlight. Next, unscrew all …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos