Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Wrangler
  6. : Windscreen wipers

Jeep Wrangler - Windscreen wipers

Jeep Wrangler (1997-2007 / TJ, MK 2)
How do you replace the wiper blades on the Jeep Wrangler?

In order to replace the wiper blades of the Jeep Wrangler you have to go and raise them so that they are not in contact with the windshield. In this way, it …read all…
Posted on 16 September 2022 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the rear wiper blade on a Jeep Wrangler

Before we can begin, we will have to get out of the cockpit of our Jeep Wrangler, and then head towards the back of the car. So let's start by lifting the rear …read all…
Posted on 21 January 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to check the windshield fluid.

To check the windscreen wiper fluid, open the bonnet by removing the two catches on the sides of the bonnet, then unhook the lever located in the central part …read all…
Posted on 25 September 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Jeep Wrangler wiper blade replacement

To replace the Jeep Wrangler wiper blade, proceed as follows: 1) Gently lift the wiper arm making sure that the safety is released. 2) Gently remove the old …read all…
Posted on 22 September 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Rear wiper replacement

It is a simple and quick process that can save you time and money without having your car stop by the body shop for replacement, in fact you just need to equip …read all…
Posted on 22 September 2023 by ScegliAuto

Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos