Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Jeep Wrangler - Door

Jeep Wrangler (2007-2018 / JK, MK 3)
How to disassemble the rear tailgate of the Jeep Wrangler
Today's main steps will show us how to disassemble and replace the rear tailgate of the Jeep Wrangler. First, let's move to the back of the vehicle and start …read all…
Posted on 26 February 2024 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
How to remove the front doors from a Jeep Wrangler.
Let's see how to easily remove the front doors on a Jeep Wrangler. This is particularly suitable in summer, when it is very enjoyable to travel "en plein air". …read all…
Posted on 9 August 2023 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
How to remove the front door of the Jeep Wrangler
In today's video tutorial we will see the steps on how to remove the front door of the Jeep Wrangler fourth series, of 2021. First of all, let's start by …read all…
Posted on 19 June 2022 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to remove the doors on Jeep Wrangler
How to remove the doors mounted on our Jeep Wrangler? Let's see how to disassemble the doors: get the special keys supplied by Jeep (luggage compartment), …read all…
Posted on 15 November 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to remove the doors on Jeep Wrangler
How to remove the doors on our Jeep Wrangler? Let's see in this video how to disassemble the doors: get the special keys supplied by Jeep, unscrew the pins in …read all…
Posted on 21 October 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to mount the doors on a Jeep Wrangler
Do we want to mount the doors on our Wrangler? Let's see in this video how to mount the doors of a Jeep Wrangler. We insert the metal door in the hinge fixed …read all…
Posted on 1 October 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to mount the door of a Jeep Wrangler
Will it be easy to fit a Wrangler door? Let's see the descriptive content immediately in this video. We lift the door with our arms and insert the two hinges …read all…
Posted on 29 September 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to remove the doors of your car.
It is advisable to first of all lower all the windows of the car, then unscrew the pins that are under the hinges that are on the outside front part of the …read all…
Posted on 25 September 2023 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos