Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate on the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Car door

Today's main steps will show you how to remove and replace the tailgate on the Jeep Wrangler. First, move to the back of the vehicle and start by removing the spare wheel from the tailgate by unscrewing the fixing bolts; then unscrew the hinge screws of the tailgate using a socket spanner with an extension, as shown in the video. At this point, cut the hinge pin to remove the tailgate, adapting the use of the vehicle in such conditions; replace the tailgate with a new one.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Tailgate Panel on Jeep Wrangler
How to Remove the Rear Tailgate Panel on Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) This guide provides instructions for removing the internal panel of the rear tailgate on a Jeep Wrangler. First, open the front door of the vehicle a…
…
Removing the Roof of a Jeep Wrangler
Removing the Roof of a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Today, you will learn how to remove the upper part of the roof from a Jeep Wrangler. First, remove the parts at the top, at the height of the front s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos