Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Plastic Panel in the Boot of a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

Today’s main instructions will show you how to dismantle and replace the side plastic cover of the boot in the Jeep Wrangler. First, open the tailgate to access the boot; then unscrew the side screws, using something thin and pointed to pry it off, as shown in the video.

At this point, you will be able to access the seatbelt pretensioner and the inner bodywork; then refit the plastic cover of the boot, securing it properly, following the video tutorial to the end!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Remove the Tailgate on the Jeep Wrangler
How to Remove the Tailgate on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Today's main steps will show you how to remove and replace the tailgate on the Jeep Wrangler. First, move to the back of the vehicle and start by rem…
How to remove the rear light of the Jeep Wrangler?
How to remove the rear light of the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To remove the rear light of the Jeep Wrangler, open the tailgate to access the side of the boot corresponding to the light to be removed. Here, you w…
Removing the Removable Roof of the Jeep Wrangler
Removing the Removable Roof of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief and simple guide, learn how to remove the removable roof of the Jeep Wrangler, following the instructions below. First, open the front …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos