Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door of the Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car door

See other generations:
Video tutorial

In today's tutorial video, we will see the steps to remove the front door of the 2021 fourth-generation Jeep Wrangler. First, start by unscrewing the screws found on the hinges of the front door using a socket spanner; then open the door and disconnect the electrical connectors for the controls located on the door itself, as shown in the video.

At this point, unscrew the additional screws from the internal hinges; then lift the door to remove it, disengaging the pin from the hinge. Apply the reverse procedure for reassembly!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on a Jeep Wrangler
How to Replace the External Door Handle on a Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) This guide shows you how to remove and replace the external door handle on a Jeep Wrangler by following these simple steps. First, open the front doo…
How to disassemble the front door on the Jeep Wrangler?
How to disassemble the front door on the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial we can see how to disassemble the front door in the Jeep Wrangler, an extremely simple and quick operation. First of all, we open th…
Removing the Door Panel on a Jeep Wrangler
Removing the Door Panel on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Let's remove the right front door panel on a Jeep Wrangler. Disconnect the battery terminals located in the engine bay, and using a screwdriver, unsc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos