Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Door trim panel

Let's remove the right front door panel on a Jeep Wrangler. Disconnect the battery terminals located in the engine bay, and using a screwdriver, unscrew the screws located in the upper lever space of the door opening and the screws present in the handle (after removing the plastic cover). Remove the plastic covering near the lock, unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull off the panel by hand and unclip it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Side Glass of the Rear Door on a Jeep Wrangler
Replacing the Side Glass of the Rear Door on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today, we will go through the instructions to dismantle and replace the side glass of the rear door on a Jeep Wrangler. First, open the rear door of …
How to Replace the External Door Handle on a Jeep Wrangler
How to Replace the External Door Handle on a Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) This guide shows you how to remove and replace the external door handle on a Jeep Wrangler by following these simple steps. First, open the front doo…
How to Remove the Speakers in the Door of a Jeep Wrangler
How to Remove the Speakers in the Door of a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Remove the speakers in the door of the Jeep? Let's see how to disassemble the panel in the Wrangler door. Open the car door, locate where to remove t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos