Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Door Handle on a Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Handle

This guide shows you how to remove and replace the external door handle on a Jeep Wrangler by following these simple steps. First, open the front door and start by removing the door panel; to do this, unscrew the fastening screws found on it, also removing the window lift handle as shown in the video. Next, unclip and disconnect the cable from the external door handle; remove the handle from the outside and replace it with the new one of the correct type, applying the reverse procedure for reassembly!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Jeep Wrangler
How to Replace the External Wing Mirror on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the external wing mirror on the Jeep Wrangler, loosen the two screws located inside the panel; once these screws are loosened, you can sli…
Replacing the External Wing Mirror of the Jeep Wrangler
Replacing the External Wing Mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside…
How to Replace the External Wing Mirror on a Jeep Wrangler?
How to Replace the External Wing Mirror on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the external wing mirror on a Jeep Wrangler, loosen the three screws located on the inside of the door, corresponding to the external wing…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos