Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Wrangler
  6. : Heater core

Jeep Wrangler - Heater core

Heater Core Jeep Wrangler (2007-2018 / mk 3, jk)

Jeep Wrangler (2007-2018 / MK 3, JK)
Guide to Remove the Heater Radiator on the Jeep Wrangler

In today's tutorial video, you will see how to remove the cabin heater radiator on the second series Jeep Wrangler from 2010, following the instructions below. …Read all…
Posted on 8 June 2026 by ScegliAuto

Airbag (2) Alternator (2) Speaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Transmission (3) Spark plugs (1) Convertible top (3) Body (5) Glove compartment (1) Key (20) Timing belt (3) V-belt (1) Onboard computer (2) Checks and maintenance (9) Throttle body (1) Dashboard (2) Bearing (2) Brake rotors (2) Headlight (10) Tail light (5) Air filter (8) Cabin air filter (13) Diesel fuel filter (1) Oil filter (4) Parking brake (3) Grille (4) Accessory kit (3) Light bulb (3) Side marker bulb (4) Headlight bulb (4) Tail light bulb (2) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (2) (2) Handle (1) Starter motor (3) Transmission fluid (1) Brake fluid (2) Engine oil (7) Power steering fluid (1) Clock (3) Door trim panel (4) Front bumper (3) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (8) Car door (10) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (12) Seat (5) Axle shaft (2) Crankshaft position sensor (1) Side mirror (8) Warning light – error code (11) (12) Tire pressure warning light (12) Service warning light (68) Brake drums and shoes (1) Fuel cap (3) Windshield wipers (5) Thermostat (3) Drivetrain (3) EGR valve (1) Blower motor (1) Side window (1) Steering wheel (3)

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos