Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Car stereo

Jeep Wrangler - Car stereo

Jeep Wrangler (2007-2018 / JK, MK 3)
How to set the time on the 2012 Jeep Wrangler.
If you own a 2012 Jeep Wrangler Mk3 and want to learn how to manually change the displayed system time, then you just need to carefully read the following …read all…
Posted on 26 July 2023 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
How do you unlock the Jeep Wrangler car stereo?
In order to unlock the Jeep Wrangler car radio, you need to extract the device from its housing, so that it is possible to go and read the serial number …read all…
Posted on 7 May 2023 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
How to disassemble the stock radio of the Jeep Wrangler 2
In today's video we will see how to disassemble the stock car radio of the second series Jeep Wrangler, following these simple steps. First of all we get on …read all…
Posted on 14 August 2022 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
How do you replace the radio on the Jeep Wrangler?
In order to replace the car radio of the Jeep Wrangler you need to pry an object in the lower part of the climate control panel, in order to completely remove …read all…
Posted on 30 July 2022 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the car stereo on the Jeep Wrangler
Let's see in this guide how to disassemble and replace the stock car stereo with a new multimedia system on the Jeep Wrangler. First we get on board the car …read all…
Posted on 17 April 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to disassemble the radio of the Jeep Wrangler Mk3
The guide shows how to remove the Jeep Wrangler Mk3 car radio. The first step is to lift the container located on the top of the center console and unscrew the …read all…
Posted on 10 April 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Disassembly of the Jeep Renegade radio
Do you want to remove the car radio of your Jeep Wrangler and don't know how to do it? Let's see in this video how to disassemble the original stereo and the …read all…
Posted on 29 November 2023 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
Instructions for disassembling the car radio
In case you need to disassemble the car radio, start by levering a thin blade tool around the upper dashboard of the center console, and disconnect the …read all…
Posted on 26 July 2023 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos