Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the car stereo on the Jeep Wrangler

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Car stereo
Operation: How to replace the car stereo on the Jeep Wrangler

Let's see in this guide how to disassemble and replace the stock car stereo with a new multimedia system on the Jeep Wrangler. First we get on board the car and begin to disassemble the central part of the dashboard, unscrewing the screws and levering the sides; after which we proceed with the disassembly of the stock radio, unscrewing the side screws and disconnecting the electrical wiring on the back, as shown in the video. At this point we are going to replace the car radio with the new one, in this case with a new multimedia system; we make any changes to the wiring and reassemble everything!


Posted on 17 April 2024 by ScegliAuto



Disassembly of the Jeep Renegade radio
Jeep Wrangler (2007-2018 / MK 3, JK) Do you want to remove the car radio of your Jeep Wrangler and don't know how to do it? Let's see in this video how to disassemble the original stereo
How do you unlock the Jeep Wrangler car stereo?
Jeep Wrangler (2018-2024 / JL, MK 4) In order to unlock the Jeep Wrangler car radio, you need to extract the device from its housing, so that it is possible to go and read the serial num
How to reset the "Tire Pressure" light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before we can begin, we will have to go and sit in the driver's seat of our Jeep Wrangler. So let's start by adjusting the tire pressure according to

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos