Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio from Jeep Renegade

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Car stereo

Do you want to remove the car radio from your Jeep Wrangler and don’t know how? In this video, see how to remove the original stereo and the trims that surround it. Remove the stereo trim frame using a plastic lever (where the air vents are located) and detach it from the central dashboard. Once the stereo is free, unscrew the securing screws located on either side with a screwdriver. Pull the stereo out with your hands and disconnect the cables (power and antenna). Install the new stereo into the dashboard (use an adapter if the stereo is 1 DIN).

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Car Radio in a Jeep Wrangler?
How to Replace the Car Radio in a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the car radio in a Jeep Wrangler, use a tool to pry the lower part of the climate control panel to remove it completely, disconnecting the…
How to Replace the Radio in a Jeep Wrangler
How to Replace the Radio in a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this guide, learn how to remove and replace the factory radio with a new multimedia system in the Jeep Wrangler. First, get in the vehicle and sta…
How to replace the radio in the Jeep Wrangler?
How to replace the radio in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) Today, we will see how to replace the radio in the Jeep Wrangler. To perform the radio replacement, we need to remove the upper dashboard cover using…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos