Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Car Radio in a Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Car stereo

To replace the car radio in a Jeep Wrangler, use a tool to pry the lower part of the climate control panel to remove it completely, disconnecting the connectors at the back. Once the panel is removed, detach the trim surrounding the radio by unscrewing the fixing screws underneath. This will allow you to extract the device from its housing by disconnecting the connector at the back. Now connect the new unit, secure it with screws, and reinstall the trim and panel.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the cabin filter of the Jeep Wrangler, open the glove compartment on the passenger side by detaching the side clips. This allows you to co…
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, open the bonnet of your Jeep Wrangler. Start by removing the front grille by unclipping it and unscrewing the fixing screws, then d…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos