Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Starter motor

See other generations:
Video tutorial

To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect the battery.

Once this is done, loosen the bolts securing the starter motor in its housing and disconnect the earth cable. After the starter motor is freed, replace it with a new part, ensuring it is properly connected and secured.

After installation, reconnect the battery.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor on the Jeep Wrangler
Replacing the Starter Motor on the Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) In today's video, you will see the steps to remove and replace the starter motor on the Jeep Wrangler, following the instructions below. First, open …
How to Replace the Starter Motor on the Jeep Wrangler?
How to Replace the Starter Motor on the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) To replace the starter motor on the Jeep Wrangler, open the bonnet to access the components inside the engine bay. The starter motor is located to th…
Replacing the Battery on a Jeep Wrangler
Replacing the Battery on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Is the battery of your Jeep Wrangler damaged? Remove the damaged battery from the engine compartment. Unlock and lift the front bonnet, releasing the…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos