Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Starter motor

In today's video, you will see the steps to remove and replace the starter motor on the Jeep Wrangler, following the instructions below. First, open the bonnet of your vehicle and disconnect the battery; next, locate the starter motor and disconnect its power wiring, as shown in the video. Now, undo the fixing screws using a socket or spanner; remove and replace the starter motor with the new one, applying the reverse procedure for reassembly!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on the Jeep Wrangler?
How to Replace the Starter Motor on the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) To replace the starter motor on the Jeep Wrangler, open the bonnet to access the components inside the engine bay. The starter motor is located to th…
How to Replace the Starter Motor on a Jeep Wrangler
How to Replace the Starter Motor on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos