Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Jeep Wrangler?

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Starter motor

To replace the starter motor on the Jeep Wrangler, open the bonnet to access the components inside the engine bay. The starter motor is located to the right of the engine block, directly beneath the battery. The part can be removed from its housing after loosening the securing bolts and disconnecting the power cables. Once the old starter motor has been removed, you can insert a new one, securing and connecting it properly. Finally, close the bonnet.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on the Jeep Wrangler
Replacing the Starter Motor on the Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) In today's video, you will see the steps to remove and replace the starter motor on the Jeep Wrangler, following the instructions below. First, open …
How to Replace the Starter Motor on a Jeep Wrangler
How to Replace the Starter Motor on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…
…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos