Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the Jeep Wrangler passenger compartment fan motor

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Interior blower
Operation: How to replace the Jeep Wrangler passenger compartment fan motor

Today we will see, in this video tutorial, how to remove and replace the motor of the passenger compartment fan of the Jeep Wrangler, in simple and quick steps. First of all we open the bonnet of our car and start by removing our control unit which we find at the top left of the engine compartment, disconnecting the various electrical connectors; we find below the passenger compartment fan, as shown in the video. At this point we unscrew the screws of the fan motor, using a socket wrench, in order to remove it; let's replace it now with the new one, applying the reverse disassembly procedure!


Posted on 20 April 2024 by ScegliAuto



How do I replace the starter motor on the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) The replacement of the starter motor of the Jeep Wrangler is carried out by opening the hood, so that you can have access to the components inside th
Jeep Wrangler Starter Motor Replacement
Jeep Wrangler (1997-2007 / MK 2, TJ) In today's video we will see the steps on how to disassemble and replace the starter motor of the Jeep Wrangler, following the instructions below. Fi
How do I replace the starter motor on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In order to replace the starter motor of the Jeep Wrangler, you must access from the inside of the wheel arch of the right front wheel. However, befo

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos