Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Antifreeze in the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Antifreeze coolant

This guide shows how to bleed and replace the coolant in the Jeep Wrangler by following these simple steps. First, remove the lower engine cover to access the coolant hose; disconnect this hose to drain the fluid, allowing it to flow into a container. At this point, open the radiator cap and pour in the new coolant or antifreeze of the correct type; fill to the maximum level, start the engine, and top up if necessary.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) To maintain your Wrangler, start by checking the coolant level in the engine cooling system. Remove the rubber hooks at the sides of the bonnet. Lift…
Jeep Wrangler (2007-2018 / MK 3, JK) The video shows how to replace the transfer case fluid in a Jeep Wrangler JK. Remove the lower skid plate. Use an Allen key to first undo the upper h…
Jeep Wrangler (2007-2018 / MK 3, JK) In this guide, learn how to change the oil in the transmission of a Jeep Wrangler. Position your vehicle on a column lift and raise it to a comfortab…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos