Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Radiator

Before you begin, open the bonnet of your Jeep Wrangler. Start by removing the front grille by unclipping it and unscrewing the fixing screws, then disconnect the relevant electrical connectors. Next, drain the cooling system, then remove the air filter housing along with its hoses. After that, unscrew and remove the bolts securing the radiator to the frame, then extract it from its housing, completing the disassembly. To install the new radiator and reassemble everything, follow these steps in reverse, and you will have completed the replacement.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
Guide to Remove the Heater Radiator on the Jeep Wrangler
Guide to Remove the Heater Radiator on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In today's tutorial video, you will see how to remove the cabin heater radiator on the second series Jeep Wrangler from 2010, following the instructi…
How to Install Doors on a Jeep Wrangler
How to Install Doors on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Want to install the doors on your Wrangler? Let's see how to fit the doors on a Jeep Wrangler. Insert the metal door into the hinge fixed to the Jeep…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos