Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Remove the Heater Radiator on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Heater core

See other generations:
Video tutorial

In today's tutorial video, you will see how to remove the cabin heater radiator on the second series Jeep Wrangler from 2010, following the instructions below. First, get inside the vehicle on the passenger side and start by removing the various plastic trims, both lower and side; then unscrew all the fastening screws found on the sides to access the internal radiator, as illustrated in the video.

At this point, disconnect the radiator hoses, allowing all the fluid to drain; then remove and replace it, following the video to the end!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator on a Jeep Wrangler
How to Replace the Radiator on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, open the bonnet of your Jeep Wrangler. Start by removing the front grille by unclipping it and unscrewing the fixing screws, then d…
How to Replace the Antifreeze in the Jeep Wrangler
How to Replace the Antifreeze in the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) This guide shows how to bleed and replace the coolant in the Jeep Wrangler by following these simple steps. First, remove the lower engine cover to a…
Where are the Fuses on a Jeep Wrangler?
Where are the Fuses on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) The fuses on a Jeep Wrangler are located inside the dedicated fuse box within the vehicle. In this model, the fuse box is situated in the engine bay,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos