Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Windscreen Washer Fluid

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Windshield wipers

To check the windscreen washer fluid, open the engine bonnet by removing the two catches on the sides. Then, release the lever in the centre under the bonnet and lift it, raising the support rod and placing it in the designated slot under the bonnet to your left. Next, open the yellow cap of the reservoir located in front of the engine on your left, which has the windscreen wiper symbol. Once the lid is open, check if the reservoir is full; if it is empty, add the necessary fluid. After checking the fluid, close the cap and the bonnet. This is how to check the fluid in your JEEP WRANGLER.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Wiper Blades on a Jeep Wrangler
How to Replace the Windscreen Wiper Blades on a Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) To replace the windscreen wiper blades on a Jeep Wrangler, lift the blades so they are not in contact with the windscreen. This allows you to detach …
How to Check the Power Steering Fluid Level on a Jeep Wrangler
How to Check the Power Steering Fluid Level on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To check the power steering fluid level, proceed as follows: 1) Open the front bonnet, ensuring it is secured with its support. 2) Locate the power s…
Wiper Blade Replacement for Jeep Wrangler
Wiper Blade Replacement for Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the wiper blade on your Jeep Wrangler, proceed as follows: 1) Gently lift the wiper arm, ensuring the lock has clicked into place. 2) Care…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos