Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement for Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Windshield wipers

To replace the wiper blade on your Jeep Wrangler, proceed as follows: 1) Gently lift the wiper arm, ensuring the lock has clicked into place. 2) Carefully remove the old wiper blade by pushing it down while holding the wiper arm steady with your other hand. 3) Gently lower the wiper arm to avoid it slamming against the windscreen and causing damage. 4) Install the new wiper blade by pushing it upwards while keeping the wiper arm steady with your other hand. 5) Lower the wiper arm. 6) Ensure everything is functioning optimally.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on a Jeep Wrangler
How to Replace the Rear Wiper Blade on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, exit the cabin of your Jeep Wrangler and head to the rear of the vehicle. Start by slightly lifting the support arm of the rear wip…
Rear Wiper Blade Replacement
Rear Wiper Blade Replacement
Jeep Wrangler (2007-2018 / MK 3, JK) This is a simple and quick task that can save you time and money without needing to take your vehicle to the garage for replacement. You just need to…
How to Replace the Windscreen Wiper Blades on a Jeep Wrangler
How to Replace the Windscreen Wiper Blades on a Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) To replace the windscreen wiper blades on a Jeep Wrangler, lift the blades so they are not in contact with the windscreen. This allows you to detach …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos