Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Wiper Blades on a Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Windshield wipers

To replace the windscreen wiper blades on a Jeep Wrangler, lift the blades so they are not in contact with the windscreen. This allows you to detach the fixing pins that connect the blades to the respective arms. Once the blades are removed, insert the new ones by securing them to the arms using the appropriate connection pins. At this point, lower the blades so they make contact with the windscreen, and check that the parts function correctly.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Wiper Blade Replacement for Jeep Wrangler
Wiper Blade Replacement for Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the wiper blade on your Jeep Wrangler, proceed as follows: 1) Gently lift the wiper arm, ensuring the lock has clicked into place. 2) Care…
How to Replace the Rear Wiper Blade on a Jeep Wrangler
How to Replace the Rear Wiper Blade on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, exit the cabin of your Jeep Wrangler and head to the rear of the vehicle. Start by slightly lifting the support arm of the rear wip…
How to Check the Windscreen Washer Fluid
How to Check the Windscreen Washer Fluid
Jeep Wrangler (2007-2018 / MK 3, JK) To check the windscreen washer fluid, open the engine bonnet by removing the two catches on the sides. Then, release the lever in the centre under th…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos