Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Tail light

Removing and replacing a rear light on a Jeep Wrangler is really easy, and we will show you how. To do this, simply undo the four screws located at the corners of the light. Once done, you can pull out the lamp and disconnect the rear connectors. At this point, you can open the light from its usually hidden side, extract and replace the bulbs; otherwise, if your goal is simply to replace the entire light, just proceed in reverse. This is a very simple operation and within everyone's reach. Cheers!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on a Jeep Wrangler?
How to replace the rear light bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the rear light bulb on a Jeep Wrangler, unscrew the four screws that secure the light, allowing it to be removed from its housing. Once re…
Replace the Rear Headlamp Bulbs on a Jeep Wrangler
Replace the Rear Headlamp Bulbs on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, you will learn how to remove and replace the rear headlamp bulbs on a Jeep Wrangler in simple, quick steps. First, move to the rear…
How to Replace the Rear Light on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this tutorial, you will see how to remove and replace the rear light on the Jeep Wrangler JK, a very simple and quick operation. You will only nee…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos