Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Headlamp Bulbs on a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to remove and replace the rear headlamp bulbs on a Jeep Wrangler in simple, quick steps. First, move to the rear of the vehicle and start by removing the small plastic cover located behind the lamp; then unscrew the plastic screw to extract the lamp from the outside, disconnecting the electrical connector as shown in the video.

At this point, remove the bulb holder along with the bulbs, replacing them with new ones if necessary; then proceed to refit the rear headlamp!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light on a Jeep Wrangler
Replacing the Rear Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Removing and replacing a rear light on a Jeep Wrangler is really easy, and we will show you how. To do this, simply undo the four screws located at t…
How to replace the rear light bulb on a Jeep Wrangler?
How to replace the rear light bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the rear light bulb on a Jeep Wrangler, unscrew the four screws that secure the light, allowing it to be removed from its housing. Once re…
Removing the Centre Brake Light on Jeep Wrangler
Removing the Centre Brake Light on Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) How to remove the third brake light on a Jeep Wrangler? The light is located above the spare wheel of the vehicle. Remove the spare wheel, then unscr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos