Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Jeep Wrangler 3.6L V6

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

In this guide, you will see the steps to remove and replace the engine air filter on the Jeep Wrangler with a 3.6 V6 engine. First, open the bonnet and start by removing the cover of the air filter box; to do this, unclip the two plastic tabs found on the sides, as shown in the video.

At this point, unscrew the screws found on the sides of the intake hose; now remove the filter and replace it with the correct new one; insert it in the correct orientation and reassemble the air filter box!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to Replace the Air Filter of the Jeep Wrangler
How to Replace the Air Filter of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Follow this brief and simple guide to remove and replace the engine air filter of the Jeep Wrangler. First, open the bonnet of your car and disconnec…
How to replace the cabin air filter of the 2021 Jeep Wrangler.
How to replace the cabin air filter of the 2021 Jeep Wrangler.
Jeep Wrangler (2018-2026 / JL, MK 4) To easily replace the cabin air filter of your 2021 Jeep Wrangler, simply follow the steps outlined in the following guide. First, purchase a new air…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos