Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Jeep Wrangler JK

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Air filter

In this video tutorial, learn how to replace the air filter on a Jeep Wrangler JK produced from 2007 to 2018. This operation is very simple, taking only a few minutes and can be done comfortably at home. Start by opening the bonnet and unclipping the four clips on the filter box cover to remove it; now you can take out the old filter. Before fitting a new filter, clean the inside of the filter box, remembering to cover the pipe opening on the cover while cleaning. Now position the new filter, close the cover, and you have finished the job.

Updated on 4 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to replace the cabin air filter of the 2013 Jeep Wrangler
How to replace the cabin air filter of the 2013 Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) If you need to replace the cabin air filter in your Jeep Wrangler on your own, then all you have to do is pay attention to the following guide and fo…
How to Replace the Air Filter of the Jeep Wrangler 3
How to Replace the Air Filter of the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / MK 3, JK) The engine air filter in your Jeep Wrangler third series (2008-2018) should be replaced periodically to avoid any abnormal overheating. First, switch…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos