Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob of the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission

See other generations:
Video tutorial

To remove the gear knob of the Jeep Wrangler, you need to use a flat screwdriver. With this, detach the chrome cover located just below the gear knob.

Once the cover has been removed, insert the screwdriver into the rivet that secures the knob to the lever. This needs to be widened as shown in the video to facilitate the removal of the knob.

At this point, pull the knob with your hands to detach it from the gear lever. When the old knob has been removed, you can replace it with a new one.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to remove the gear shift knob of the Jeep Wrangler JK
How to remove the gear shift knob of the Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Removing the gear shift knob of your Jeep Wrangler JK is really simple and if you want to complete the operation in question in a few seconds, just f…
How to Replace the Gear Knob on a Jeep Wrangler
How to Replace the Gear Knob on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the gear knob on a Jeep Wrangler, grasp the knob and rotate it counterclockwise, using a spanner if necessary. Once the knob has been unsc…
How to Remove the Gear Knob from a 2011 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) The gear knob of a 2011 Jeep Wrangler consists of two outer parts and three inner parts. To remove the knob, first remove the lower part using a flat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos