Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Pad Oil Replacement

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake fluid

See other generations:
Video tutorial

Lift the bonnet and undo all the bolts securing the reservoir in front of the brake servo. Remove the reservoir for better access to the brake servo.

Place the brake oil reservoir on a workbench and secure it in a vice. Press the piston down, and once the piston is pushed, seal the two side holes.

With the holes sealed, repeat the process four times until you feel the right pressure needed to push the piston. Now you can reposition the reservoir by reversing the steps outlined earlier.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads on a Jeep Wrangler
Replacing the Rear Brake Pads on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Here are the simple steps to replace the rear brake pads on a Jeep Wrangler. First, lift the vehicle and remove the wheel. Now, unscrew the bolts hol…
How to Replace the Front Brake Pads on a Jeep Wrangler?
How to Replace the Front Brake Pads on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front brake pads on a Jeep Wrangler, first, loosen the wheel bolts of the corresponding wheel. Once the wheel is removed, you will hav…
Guide to Replacing Brake Pads
Guide to Replacing Brake Pads
Jeep Wrangler (1997-2007 / MK 2, TJ) This guide is a simple tool to help those who want to replace the brake pads on their car. You mainly need patience and passion. First, remove the bo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos