Do it yourself
| ||||
|
Jeep Wrangler - Video tutorial
Model: Jeep Wrangler
JL, MK 4
- Years 2018-2024 In this guide, we will see the steps that will allow us to disassemble and install the bulbs of the side turn signals of the exterior rearview mirror of the Jeep Wrangler. First of all, let's move to the side of the car and start by removing the plastic cover of the mirror, removing the glass first, levering the sides with something thin; then we disconnect the electrical connector of the bulb to remove it along with the turn signal, as shown in the video. We replace the side turn signal with the new one and reassemble the exterior rearview mirror!
Posted on 7 November 2023 by ScegliAuto
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |