Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Side mirror

Below we will see the main instructions that will allow us to disassemble and replace the external rearview mirror of the Jeep Wrangler. First, we open the front door of the vehicle and start removing the inner plastic cover of the mirror; then we unscrew the fixing screws to remove the mirror from the outside, disconnecting the electrical connector to remove it permanently, as shown in the video. At this point, we install the new mirror, fixing it correctly; finally, we adjust the mirror and reassemble the plastic cover.

Posted on 6 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Jeep Wrangler
How to Replace the External Wing Mirror on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the external wing mirror on the Jeep Wrangler, loosen the two screws located inside the panel; once these screws are loosened, you can sli…
Replacing the External Wing Mirror of the Jeep Wrangler
Replacing the External Wing Mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside…
How to Replace the External Wing Mirror on a Jeep Wrangler?
How to Replace the External Wing Mirror on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the external wing mirror on a Jeep Wrangler, loosen the three screws located on the inside of the door, corresponding to the external wing…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos