Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on the Jeep Wrangler 3

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Side mirror

In this brief guide, find instructions on how to remove and replace the external wing mirror on the third series Jeep Wrangler. First, open the front door and start by removing the door panel; to do this, unscrew all the screws on it, prying at the edges of the panel to detach and remove it, as shown in the video. Next, disconnect the electrical connectors at the back; then unscrew the screws of the wing mirror using a Torx key. Finally, slide out and replace the mirror from the outside!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the External Wing Mirror of the Jeep Wrangler
Replacing the External Wing Mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside…
How to Replace the External Wing Mirror on a Jeep Wrangler?
How to Replace the External Wing Mirror on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the external wing mirror on a Jeep Wrangler, loosen the three screws located on the inside of the door, corresponding to the external wing…
How to replace the external rearview mirror of the Jeep Wrangler
How to replace the external rearview mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Below we will see the main instructions that will allow us to disassemble and replace the external rearview mirror of the Jeep Wrangler. First, we op…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos