Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror of the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Side mirror

This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside and start by detaching the glass from the external wing mirror, disconnecting the electrical connector; then, unscrew the fixing screws of the wing mirror, disconnecting the various wiring to remove it from the door. At this point, replace the entire wing mirror or just the glass, reassembling everything and finally adjusting the wing mirror glass!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on a Jeep Wrangler?
How to Replace the External Wing Mirror on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the external wing mirror on a Jeep Wrangler, loosen the three screws located on the inside of the door, corresponding to the external wing…
How to Replace the External Wing Mirror on the Jeep Wrangler
How to Replace the External Wing Mirror on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the external wing mirror on the Jeep Wrangler, loosen the two screws located inside the panel; once these screws are loosened, you can sli…
How to Replace the External Wing Mirror on the Jeep Wrangler 3
How to Replace the External Wing Mirror on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / MK 3, JK) In this brief guide, find instructions on how to remove and replace the external wing mirror on the third series Jeep Wrangler. First, open the front…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos