Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

See other generations:
Video tutorial

To replace the external wing mirror on a Jeep Wrangler, loosen the three screws located on the inside of the door, corresponding to the external wing mirror. Once these three screws are loosened, you can pull the mirror out of its housing, disconnecting the connector inside as well.

This allows you to connect the new mirror to the connector and position it in its seat. Finally, secure it in place with the screws from the inside of the door.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror of the Jeep Wrangler
Replacing the External Wing Mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside…
How to Replace the External Wing Mirror on the Jeep Wrangler
How to Replace the External Wing Mirror on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the external wing mirror on the Jeep Wrangler, loosen the two screws located inside the panel; once these screws are loosened, you can sli…
How to Replace the External Wing Mirror on the Jeep Wrangler 3
How to Replace the External Wing Mirror on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief guide, find instructions on how to remove and replace the external wing mirror on the third series Jeep Wrangler. First, open the front…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos