Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

To replace the external wing mirror on the Jeep Wrangler, loosen the two screws located inside the panel; once these screws are loosened, you can slide the old mirror out from the outside of the door, as there will be no connectors or other locking elements.

When the old mirror is removed, insert the new one from the outside; finally, secure the piece in its housing by tightening the screws from inside the door that were previously removed.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror of the Jeep Wrangler
Replacing the External Wing Mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside…
How to Replace the External Wing Mirror on the Jeep Wrangler 3
How to Replace the External Wing Mirror on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief guide, find instructions on how to remove and replace the external wing mirror on the third series Jeep Wrangler. First, open the front…
How to replace the external rearview mirror of the Jeep Wrangler
How to replace the external rearview mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Below we will see the main instructions that will allow us to disassemble and replace the external rearview mirror of the Jeep Wrangler. First, we op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos