Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Rearview Mirror of the Audi A5

Model: Audi Q5 MK 2, 80A - Years 2017-2025
Part: Rearview mirror

In this guide, discover the steps to remove and replace the interior rearview mirror of the Audi A5. First, get inside the vehicle and begin removing the entire plastic cover located on the back of the mirror. Detach the mirror mount and disconnect the electrical connector to remove it, as shown in the video. Next, replace and install the new rearview mirror, securing it properly and connecting it; all that's left is to adjust the angle of the mirror!

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the turn signal light of the Audi Q5 rearview mirror
How to replace the turn signal light of the Audi Q5 rearview mirror
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, we will see the instructions that will allow us to disassemble and replace the turn signal light of the external rearview mirror of th…
How to Replace the Outer Mirror Cap on an Audi Q5
How to Replace the Outer Mirror Cap on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) These simple steps will guide you through the process of removing and replacing the outer mirror cap on the Audi Q5. First, move to the outside of th…
Replacement of the turn signal indicators of the Audi Q5 mirror
Replacement of the turn signal indicators of the Audi Q5 mirror
Audi Q5 (2017-2025 / MK 2, 80A) Below we will see the instructions that will allow us to disassemble and replace the turn signals of the external rearview mirror of the Audi Q5. Fir…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos