Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outer Mirror Cap on an Audi Q5

Model: Audi Q5 MK 2, 80A - Years 2017-2025
Part: Side mirror

These simple steps will guide you through the process of removing and replacing the outer mirror cap on the Audi Q5. First, move to the outside of the vehicle and start by detaching and removing the side glass, disconnecting the cable located at the back; then remove the outer mirror cap by prying it off the sides and disconnecting the turn signal connector, as shown in the video. At this point, replace and install the new plastic mirror cap, reassembling and finally adjusting the glass.

Posted on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the turn signal light of the Audi Q5 rearview mirror
How to replace the turn signal light of the Audi Q5 rearview mirror
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, we will see the instructions that will allow us to disassemble and replace the turn signal light of the external rearview mirror of th…
Replacement of the turn signal indicators of the Audi Q5 mirror
Replacement of the turn signal indicators of the Audi Q5 mirror
Audi Q5 (2017-2025 / MK 2, 80A) Below we will see the instructions that will allow us to disassemble and replace the turn signals of the external rearview mirror of the Audi Q5. Fir…
How to Replace the Interior Rearview Mirror on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this simple operation, follow a few straightforward steps to replace the mirror without damaging any sensitive parts of your vehicle. Start by rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos