Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of the Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Steering wheel

See other generations:
Video tutorial

Today, we will see in this video tutorial how to disassemble and replace the steering wheel and its airbag on the Jeep Wrangler, following the instructions below. First, get inside the vehicle and start by disassembling and removing the airbag; to do this, undo the fixing screws located on the back using a 10 mm socket spanner, as shown in the video.

Now, disconnect the airbag electrical connector and undo the central steering wheel bolt; remove it and replace it with the new one, applying the reverse procedure for reassembly!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Removing the Roof of a Jeep Wrangler
Removing the Roof of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Today, you will learn how to remove the upper part of the roof from a Jeep Wrangler. First, remove the parts at the top, at the height of the front s…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to remove the gear shift knob of the Jeep Wrangler JK
How to remove the gear shift knob of the Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Removing the gear shift knob of your Jeep Wrangler JK is really simple and if you want to complete the operation in question in a few seconds, just f…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos