Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel of the Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Steering wheel

Removing the steering wheel of the Wrangler? Follow these steps to disassemble the steering wheel and all its components. Insert the removal key into the slots at the back of the steering wheel and unscrew the pins until the steering wheel is free. Once the airbag is detached, disconnect its power connectors and remove it from the steering wheel. Unscrew the central pin and take the steering wheel off the column. Fit the new steering wheel and tighten the nut, then reconnect the airbag power connector and secure the pins at the back of the steering wheel. Start the vehicle and check the operation of the steering wheel and its components.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel on a Jeep Wrangler
Removing the Steering Wheel on a Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) Do you want to remove the steering wheel from the Jeep Wrangler? Here’s how to take off the steering wheel and airbag. Disconnect the battery termina…
How to Remove the Steering Wheel of the Jeep Wrangler
How to Remove the Steering Wheel of the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today, we will see in this video tutorial how to disassemble and replace the steering wheel and its airbag on the Jeep Wrangler, following the instru…
How to Remove the Radio from a Jeep Wrangler Mk3
How to Remove the Radio from a Jeep Wrangler Mk3
Jeep Wrangler (2007-2018 / MK 3, JK) This guide shows how to remove the radio from a Jeep Wrangler Mk3. The first step is to lift the container located on top of the centre console and u…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos