Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Airbag in a Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Airbag

This video shows how to disable the airbag in the Jeep Wrangler TJ, a very simple operation. According to road safety regulations, the passenger side airbag must be disabled whenever a rear-facing child seat is placed in the seat. All you need to do is locate the black cap in front of the gear lever, open it, and insert the key into the ignition. At this point, simply turn the key and set the switch to the desired position. If disabled, you will see the corresponding warning light on the dashboard.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) Today, we will see in this video tutorial how to disassemble and replace the steering wheel and its airbag on the Jeep Wrangler, following the instru…
Jeep Wrangler (1997-2007 / MK 2, TJ) Do you want to remove the steering wheel from the Jeep Wrangler? Here’s how to take off the steering wheel and airbag. Disconnect the battery termina…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos