Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Jeep Wrangler 3

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Warning light – error code

In this new guide dedicated to your Jeep Wrangler Mk3 (year 2007-2018), we will describe all the necessary steps to correctly reset the maintenance light that continues to illuminate on the instrument panel even after regular servicing. First of all, reach the driver's seat and make sure your Jeep Wrangler is completely turned off, then insert the key but do not start the engine and simultaneously press the accelerator pedal all the way down four times in a row. Finally, turn on the engine to complete the reset of the light.

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to reset the oil change indicator light on the Jeep Wrangler
How to reset the oil change indicator light on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this article, we will illustrate the procedure for resetting the oil change indicator light and the service indicator light on the Jeep Wrangler J…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos