Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2018 Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

To manually reset the maintenance light on your 2018 Jeep Wrangler, simply follow the procedure described in this guide. The first step is to start the ignition by pressing the ignition button twice in quick succession located to the right of the steering wheel.

Next, press the accelerator pedal three times within ten seconds. Finally, wait for the maintenance light to disappear from the dashboard display, and the reset procedure is successfully completed.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to Reset the Maintenance Light on a Jeep Wrangler Mk3
How to Reset the Maintenance Light on a Jeep Wrangler Mk3
Jeep Wrangler (2007-2018 / JK, MK 3) In this guide for your Jeep Wrangler Mk3 (2007-2018), we will describe all the steps necessary to correctly complete the manual reset of the maintena…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos