Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

These short and simple steps will show us how to reset the regular maintenance warning (service) of the Jeep Wrangler. First of all, we get into the car and start the instrument panel; then we press the arrow button until we reach the service voice, then we hold down the "ok" button found in the center until the regular maintenance warning is correctly reset, as shown in the video.

At this point, we turn off the instrument panel and start the engine, completing the service reset operation!


Posted on 9 August 2025 by ScegliAuto


Related tutorials

Jeep Wrangler (2007-2018 / JK, MK 3) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos