Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the oil filter and engine oil in a Jeep Wrangler.

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler JK, MK 3 - Years 2007-2018
Part: Oil filter
Operation: How to replace the oil filter and engine oil in a Jeep Wrangler.

In this video tutorial we can see how it is possible to replace the oil filter and engine oil in a Jeep Wrangler, following some basic steps: the first thing to do is to lift the engine hood and secure it with the appropriate rod; next step we need to take a 24 mm ratchet socket wrench and unscrew the oil filter; once we have removed the cartridge with the filter, we need to replace the old filter by placing the new one in the cartridge, change the cartridge gasket before screwing in place; now we can screw the filter with the 24 mm socket wrench. Now that we have screwed the new filter in place we need to jack up the car and put safety stands under the vehicle. Place a container for the collection of used oil under the oil pan, unscrew the oil drain plug with a wrench and wait for all the oil to drain into the container, then screw the drain plug back on. oil. Lower the car and top up the new engine oil with the help of a funnel.


Posted on 14 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos