Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change for Jeep Wrangler [UK]

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

Open the bonnet and unscrew the oil filler cap, position the vehicle on a ramp and lift it up, locate the oil drain plug and, using an Allen key, loosen the nut. Place a container for the used oil on the floor, unscrew the plug completely and wait a few minutes for all the oil to drain out. Next, unscrew the oil filter cartridge with the appropriate tool.

Take the O-ring from the new cartridge and lubricate it with a drop of oil. Screw the filter back on by hand and reattach the oil drain plug after cleaning it. Get a funnel and the suitable lubricant and fill from the top cap. Wait a few minutes and check the oil level by pulling out the dipstick, ensuring the level is between the minimum and maximum.

Replace the lubricant filler cap and close the engine bay.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Follow the procedure to reset the service light for the regular maintenance oil change on the Jeep Wrangler. First, get in the vehicle and turn on th…
Resetting the Oil Change Light on Jeep Wrangler JK
Resetting the Oil Change Light on Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Before starting the reset procedure for the oil change light on the Jeep Wrangler JK, ensure, as you should for any maintenance operation on any vehi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos