Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change and Maintenance

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

Release and lift the bonnet, then locate the oil filler cap, which is on the right side of the engine. Above it, you will find indications on the type of oil to use. On the other side, you can find the oil level indicator, allowing you to check the level at any time.

For an accurate reading, wait until your vehicle has been at rest for at least 30 minutes. If the level is too low, you can top up the oil by simply removing the cap located at the side of the engine, using a funnel if necessary.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a 2019 Jeep Wrangler
How to Reset the Oil Warning Light on a 2019 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) The service light on the 2019 Jeep Wrangler must be reset only after having the service carried out at a workshop. The service includes the replaceme…
Oil Change on a 2017 Jeep Wrangler
Oil Change on a 2017 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial video, learn how to change the engine oil on a 2017 Jeep Wrangler. Begin by going under the vehicle and removing the oil sump plug t…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Follow the procedure to reset the service light for the regular maintenance oil change on the Jeep Wrangler. First, get in the vehicle and turn on th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos