Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlights on the Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the front headlights on the Jeep Wrangler, following the instructions provided below. First, move to the front of your vehicle and start unscrewing the fixing screws located on the sides of the headlamp using a cross-head screwdriver to remove the metal frame; then unscrew the additional screws of the front headlight found on the sides, as shown in the video.

At this point, disconnect the electrical connector of the dipped beam bulb to remove and replace the headlight assembly with the new one!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bulbs of the Jeep Wrangler
How to Replace the Front Bulbs of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, you will learn how to replace the front bulbs of the third series Jeep Wrangler, American model. Start by removing the front grille, t…
…
How to Replace the Headlights on a Jeep Wrangler
How to Replace the Headlights on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Today, in this brief and simple guide, you will find step-by-step instructions for removing and replacing the front headlights on a Jeep Wrangler. Fi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos