Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs of the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

In this video, you will learn how to replace the front bulbs of the third series Jeep Wrangler, American model. Start by removing the front grille, taking out the two plastic pins.

Now that it is removed, proceed to take out the headlights by unscrewing the support screws. Once the headlight is removed, disconnect the bulb from the housing and then extract the blown bulb.

Specifically, the car uses H13 bulbs. Reinsert the new bulbs, check for correct operation after reconnecting the contacts, and reassemble everything following the original procedure.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to replace the front headlight of the Jeep Wrangler
How to replace the front headlight of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) The instructions in this guide will show you how to remove and replace the front headlight of the Jeep Wrangler. First, open the bonnet of the vehicl…
How to Replace the Front Headlight on a Jeep Wrangler?
How to Replace the Front Headlight on a Jeep Wrangler?
Jeep Wrangler (1987-1996 / YJ, MK 1) To replace the front headlight on a Jeep Wrangler, first open the bonnet to disconnect the connector at the back of the headlight. Next, unscrew all …
How to Replace the Front Indicator Bulb on a Jeep Wrangler?
How to Replace the Front Indicator Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front indicator bulb on a Jeep Wrangler, access the inner part of the front bumper to disconnect the connector for the side light. Onc…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos