Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Headlight

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Headlight

To remove the front headlight, you must first remove the trim: open the front bonnet, extract the six push clips located at the top of the trim along the bonnet closure line, and remove the trim after detaching the fog light bulb holders. At this point, you can access the four fixing screws of the headlight (the same screws secure the protective grille), unscrew them, and pull the headlight forward enough to disengage the safety of the power connector and disconnect it, thus completing the headlight removal.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Jeep Wrangler?
How to Replace the Front Headlight on a Jeep Wrangler?
Jeep Wrangler (1987-1996 / MK 1, YJ) To replace the front headlight on a Jeep Wrangler, first open the bonnet to disconnect the connector at the back of the headlight. Next, unscrew all …
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to Replace the Headlight Bulbs in the Jeep Wrangler?
How to Replace the Headlight Bulbs in the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) In this video, you can see how to replace the headlight bulbs in the Jeep Wrangler. For this simple and quick operation, you will need a cross-head s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos